BZJYT - 680 WHITE, RICH WALL INT/EXT VINYL ACRYLIC (SUPDAT)

  • MSDS: BZJYT
  • Manufacturer: RICHARD'S PAINT MFG CO INC
  • Product Name: 680 WHITE, RICH WALL INT/EXT VINYL ACRYLIC (SUPDAT)
  • National Stock Number: 8010-00N063984
Product Identification

Product ID:680 WHITE, RICH WALL INT/EXT VINYL ACRYLIC (SUPDAT)
MSDS Date:02/07/1992
FSC:8010
NIIN:00N063984
MSDS Number: BZJYT

Responsible Party
RICHARD'S PAINT MFG CO INC
200 PAINT ST
ROCKLEDGE, FL 32955
US

Emergency Phone: 407-636-6200

Info Phone: 407-636-6200

Cage: DO600

Contractor
RICHARDS PAINT MFG CO INC
ROCKLEDGE, FL 32955 US

Telephone: 407-636-6200

Cage: 0WRC5

Ingredients

1,2-PROPANEDIOL; (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


1.18 LB/GAL (142 G/L);

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CAN CAUSE DIZZINESS,
BREATHING DIFFICULTIES, HEADACHES AND LOSS OF COORDINATION. EYE
CONTACT: CAN CAUSE SEVERE IRRITATION, TEARING, REDNESS AND BLURRED
VISION. SKIN CONTACT: CAN DRY AND DE FAT SKIN CAUSING CRACKING,
IRRITATION AND DERMATITIS. INGESTION: CAN CAUSE GASTROINTESTINAL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: IRRITATION, VOMITING, NAUSEA AND
DIARRHEA.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS.

First Aid

First Aid:INHALATION: MOVE TO FRESH AIR. IF BREATHING STOPS, APPLY
ARTIFICIAL RESPIRATION AND SEEK IMMEDIATE MEDICAL ATTENTION. EYES:
FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15 MINUTES AND
SEEK IMMEDI ATE MEDICAL ATTENTION. SKIN: WASH THOROUGHLY WITH SOAP
AND WATER. SEEK MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING; CAN CAUSE PNEUMONITIS AND PULMONARY EDEMA.

Fire Fighting

Flash Point Method:TCC
Flash Point:214F,101C
Lower Limits:0.6%
Upper Limits:12.5%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL,
WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER SHOULD NOT BE USED, EXCEPT AS FOG TO
KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE THE SPILL AREA AND COVER WITH INERT, ABSORBENT
MATERIAL AND REMOVE TO A DISPOSAL CONTAINER. OBSERVE ALL RELEVANT
FEDERAL, STATE AND LOCAL LAWS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID HOT METAL SURFACES. USE ONLY IN
WELL VENTILATED AREAS. KEEP CONTAINERS CLOSED WHEN NOT IN USE. KEEP
AWAY FROM EXTREME HEAT AND OPEN FLAMES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:WHEN SPRAYING THIS MATL, USE A NIOSH/MSHA APPRVD
CARTRIDGE RESP SUITABLE TO KEEP AIRBORNE MISTS & VAPS BELOW TLV.
WHEN USING IN POORLY VENTILATED OR CONFINED AREAS, USE NIOSH/MSHA
APPRVD FRESH AIR SUP PLY RESP OR SCBA.
Ventilation:GENERAL MECH VENT OR LOCAL EXHAUST SHOULD BE SUITABLE TO
KEEP CONCS BELOW TLV. VENT EQUIP SHOULD BE EXPLOSION PROOF.
Protective Gloves:IMPERMEABLE, CHEMICAL HANDLING GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . USE IMPERMEABLE APRONS & PROT CLTHG (SUP
DAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: SEMI-GLOSS ENAMEL. OTHER PROT EQUIP: WHENEVER
POSSIBLE TO PREVENT SKIN CONTACT. USE OF HEAD CAPS WHENEVER POSS IS
ALSO STRONGLY RECOMMENDED.

Chemical Properties

Boiling Pt:B.P. Text:>369F,>187C
Vapor Density:HVR/AIR
Spec Gravity:1.2 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SOLUBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIAL, STRONG ACIDS, OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERE, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.

Disposal

Waste Disposal Methods:CONSULT ALL FEDERAL, STATE AND LOCAL HAZARDOUS
WASTE REGULATIONS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE
LANDFILLS. OBEY ALL RELEVANT LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.